Hager 1267 Full Mortise Standard Weight Steel Swing Clear Spring Hinge (4-1/2 in.) for Square Edge Doors 1 each
ANSI K81071F
Swing clear spring hinge for automatic closing of door. Provides the features of both a swing clear hinge and a spring hinge.
For square edge doors
Full Mortise Hinges have one leaf mortised in the door edge and the other leaf mortised in the jamb. This is the most common hinge application.
For swing clear hinges, the hinge leaves are formed to locate the barrel in a position that allows the door to SWING CLEAR of the opening when opened to 90 degrees.
Single acting spring hinge, square corners. Full spring tension may not be required on all hinges.
Number of hinges used determines maximum door weight and width. Strong wind conditions, drafts, carpeting drag, twisted/misaligned frames, or weatherstripping on doors may require additional spring hinges.
Hager does not recommend using spring hinges on doors over 7ft.
For maximum versatility use all spring hinges or a combination of spring hinges and ball bearing hinges. Do not use plain bearing hinges.
Three Knuckle
Template Hole Pattern
Material: Steel w/ Steel components
Fasteners: 1/2 x 12-24 FH machine screws, 1-1/4 x 12 FH wood screws
Specify finish when ordering.
Standard packaging includes one (1) hinge with screws.
Complies with ANSI/BHMA standards for ANSI A156.1
Meets codes for hotels, motels, institutions, and commercial buildings.
The following part numbers are available by selecting the options above.
1267-4.5-US101267-4.5-US10A1267-4.5-US10B1267-4.5-US261267-4.5-US26D1267-4.5-US31267-4.5-USP
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.