Grade 1 Mortise Sectional Lockset
Heavy duty commercial, industrial, institutional
BHMA ANSI A156.13 Certified Grade 1, Series 1000, Operational and Security with standard mortise cylinder
UL/cUL Listed for all functions up to 3 hours "A" label single doors; UL10C Positive Pressure Rated; UL10B Neutral Pressure Rated
ADA Compliant ANSI A 117.1 Accessibility Code
Self-adjusting case for beveled or square edge doors
Stopworks are incorporated in thumbturn
Breakable spindles to prevent lock from unlocking or being damaged
Standard door prep: 3-5/8 in. Center of cylinder to spindle; 2-7/16 in. Center of thumbturn to spindle
Backset 2-3/4 in. only
Door thickness: 1-3/4 in. as standard. Available for 2 in., 2-1/4 in., and 2-1/2 in. Must specify when ordering.
Fixed Cylinder drilled 6 pin, Keyed 5 pin as standard. Small (SFIC) and Large (LFIC) Format Interchangeable Core options available (cores sold separately).
Schlage C Keyway as standard. Other keyways available upon request. Please specify when ordering. Two operating keys supplied per lock.
Schlage "L" cam is used standard on Hager mortise locks
Keyed Different as standard. Other keying options available upon request. Please specify when ordering.
Square Corner Armor Front 1-1/4 in. x 8 in. x 7/32 in. as standard. Optional round corner available. Please specify when ordering.
3985 ASA Strike supplied as standard (ANSI 4-7/8 in. x 1-1/4 in. with 1-3/16 in. Lip) Optional strikes available upon request. Please specify when ordering.
Lock Case: 4-5/16 in. x 6 in. x 1 in.
Deadlocking Latchbolt: all Stainless Steel 3/4 in. throw with anti-friction tongue
Entry - Deadlocking latchbolt by lever either side, except when turn button inside locks outside lever. Pushing turn button in locks outside lever, requiring use of key outside to unlock. Turning inside lever unlocks outside lever. Pushing in and turning button locks outside lever, requiring key at all times. Turning inside lever does not unlock outside lever until button is manually turned to unlocked position. Inside lever always free.
Exposed Trim is cast zinc as standard. Stainless Steel option available for some levers for an additional upcharge.
Lever styles available: Archer, August, Charles, Johnston, Joshua, Louis, Warren, William, and Withnell
Shipped Left Hand Reverse as standard; easily field reversible. Factory handing available upon request for an additional upcharge.
Rose diameter: 2-7/16 in.
All finishes other than US26D (Satin Chrome) are subject to an extended lead time.
Functions: 10 Passage, 17 Single Dummy, 27 Dummy Pair, 40 Privacy, 44 Privacy with Cointurn, 50 Office, 53 Entry, 56 Corridor, 57 Classroom Security, 61 Apartment, 70 Classroom, 80 Storeroom, 81 Storeroom with Deadlock, 82 Institution, and 96 Privacy with Indicator
This product can expose you to chemicals which are known to the State of California to cause cancer, to cause birth defects or other reproductive harm. Wash your hands after installing for uninstalling this product.
For more information, go to www.P65Warnings.ca.gov
The following part numbers are available by selecting the options above.
3853-SECT-US10-JOS-H1-KA-0-0-0, 3853-SECT-US10-JOS-NC-0-0-0, 3853-SECT-US10-JOS-SCC-KA-0-0-0, 3853-SECT-US10B-JOS-H1-KA-0-0-0, 3853-SECT-US10B-JOS-NC-0-0-0, 3853-SECT-US10B-JOS-SCC-KA-0-0-0, 3853-SECT-US15-JOS-H1-KA-0-0-0, 3853-SECT-US15-JOS-NC-0-0-0, 3853-SECT-US15-JOS-SCC-KA-0-0-0, 3853-SECT-US26-JOS-H1-KA-0-0-0, 3853-SECT-US26-JOS-NC-0-0-0, 3853-SECT-US26-JOS-SCC-KA-0-0-0, 3853-SECT-US26D-JOS-H1-KA-0-0-0, 3853-SECT-US26D-JOS-NC-0-0-0, 3853-SECT-US26D-JOS-SCC-KA-0-0-0, 3853-SECT-US3-JOS-H1-KA-0-0-0, 3853-SECT-US3-JOS-NC-0-0-0, 3853-SECT-US3-JOS-SCC-KA-0-0-0, 3853-SECT-US32D-JOS-H1-KA-0-0-0, 3853-SECT-US32D-JOS-NC-0-0-0, 3853-SECT-US32D-JOS-SCC-KA-0-0-0, 3853-SECT-US4-JOS-H1-KA-0-0-0, 3853-SECT-US4-JOS-NC-0-0-0, 3853-SECT-US4-JOS-SCC-KA-0-0-0
- Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.