Hager 790-904 Stainless Steel Continuous Mortise Half Surface 1 each
Stainless steel hinges are listed as actual lengths 83-1/8 in. (7ft opening), 85 in. (7ft 2in. opening), 95 in. (8ft opening), and 119 in. (10ft opening) for convenience in application to nominal sized doors.
Must specify length when ordering. Custom lengths available by special order only. Call for pricing and availability.
Hager 790 Series stainless steel continuous hinges are approved for ANSI A156.26 Grade 1 for 150-pound doors.
Hager 790 Series hinges are approved by Underwriters Laboratories, Inc. Fire Rated label for up to 3 hours for metal doors and 90 minutes for wood composite doors.
Can be used with doors of any material
Not recommended for doors with a beveled edge on the hinge side
Features dual 6/6 Nylon bearings between each knuckle and 1/4 in. diameter Stainless Steel Pin
Maximum door thickness: 1-3/4 in.
Maximum door length: 10 feet
Maximum door weight: 300 lbs
1/8 in. inset
Clearance: 1/8 in. minimum hinge side plus standard lockside clearance
Electric modifications available by special order only. Call for pricing and availability.
Material: 14 gauge Type 304 Stainless Steel
Fasteners: no.10-24 x 5/8 in. S/S Dril-Kwik (metal frame), no.1/4-20 x 3/4 in. 2C Dril-Kwik (metal door), no.10-16 x 1-1/4 in. S/S Type AB (wood door)
Door reinforcement not required for wood doors to 200 lbs. For metal doors, a 1/8 in. thick reinforcement plate is recommended along the hinge edge for proper thread engagement of the adjustment studs.
Frame reinforcement not required to 200 lbs. For heavier weight, use 16-gauge channel.
Available in Clear Anodized Satin Aluminum or Dark Bronze Anodized Aluminum finsihes. Specify when ordering.
ADA Certification
The following part numbers are available by selecting the options above.
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.