Hager BB1197 Full Mortise Heavy Weight Five Knuckle Ball Bearing Anchor Hinge (Brass or Stainless Steel) 5 in. x 4-1/2 in. 1 each
ANSI A2511 (Brass) ANSI A5511 (Stainless Steel)
Handed hinge. Must specify handing when ordering.
For use on heavy weight doors receiving high frequency use and when concealed door closer is installed.
For beveled edge doors
Full Mortise Hinges have one leaf mortised in the door edge and the other leaf mortised in the jamb. This is the most common hinge application.
For anchor hinges, the hinge leaves are mortised in the door and jamb at the top corner, ANCHORING the door in the jamb. Provides increased reinforcement and support at the top corner where stress can occur due to high frequency service and abuse. Only available in Full Mortise type.
Five Knuckle with button tip and plug
Two (2) anchor leaves
Four ball bearings
Template Hole Pattern
Material: Brass w/ Stainless Steel pin, Stainless Steel w/ Stainless Steel pin
Fasteners: 1/2 x 12-24 machine screws, 1-1/4 x 12 wood screws
Specify finish when ordering.
Standard packaging includes one (1) hinge with screws.
Complies with ANSI/BHMA standards for ANSI A156.1
Note: Must be used with one pair of heavy weight full mortise hinges (BB1168 or BB1199 - sold separately)
For special requests (i.e. Raised Barrel, Hospital Tips, special Screws, etc.) please call for pricing and availability.
The following part numbers are available by selecting the options above.
BB1197-5X4.5-US10-LHBB1197-5X4.5-US10-RHBB1197-5X4.5-US10B-LHBB1197-5X4.5-US10B-RHBB1197-5X4.5-US26D-LHBB1197-5X4.5-US26D-RHBB1197-5X4.5-US32D-LHBB1197-5X4.5-US32D-RH
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.