Hager Half Mortise Standard Weight Five Knuckle Plain Bearing Steel Hinge NRP Antique Bronze Lacquered 4.5 in. - 1129-4.5-US10A-NRP
ANSI A8233
For use on medium weight hollow metal doors with channel iron frames requiring low frequency service.
Half Mortise hinges have one leaf mortised in the door edge and the other leaf applied to the surface of the jamb. Used when conditions prevent the jamb leaf from being mortised (i.e. channel iron jamb)
Five Knuckle with button tip and plug
Template Hole Pattern
Supplied with Removable Pin (SRP) as standard.
Most hinges and/or finishes available with Non-Removable Pin (NRP) for an additional charge. Specify SRP or NRP when applicable.
Non-Removable pin prevents the hinge pin from being removed when the door is closed. A threaded set screw located in the barrel is tightened down into a groove in the hinge pin.
Beveled surface leaf
Reversible
Material: Steel w/ Steel pin
Fasteners: (door leaf) 1/2 x 12-24 FH, (jamb leaf) 1/2 x 12-24 OH
Specify finish when ordering.
Standard packaging includes one (1) hinge with screws.
Complies with ANSI/BHMA standards for ANSI A156.1
Note: Plain bearing not recommended if door closer used. With door closer, use ball bearing hinges.
For special requests (i.e. Raised Barrel, Hospital Tips, special Screws, etc.) please call for pricing and availability.
The following part numbers are available by selecting the options above.
1129-4.5-US10-NRP1129-4.5-US101129-4.5-US10A-NRP1129-4.5-US10A1129-4.5-US10B-NRP1129-4.5-US10B1129-4.5-US26D-NRP1129-4.5-US26D1129-4.5-USP-NRP1129-4.5-USP
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.