Hager Half Surface Standard Weight Steel Spring Hinge 4-1/2 in. Prime Coat - 1253-4.5-USP
ANSI K81081F
Half Surface hinges have one leaf applied to the surface (face) of the door and the other leaf mortised in the jamb. Used when conditions prevent the door leaf from being mortised (i.e. kalamein or mineral core door)
Spring hinges are for automatic closing of doors. Full spring tension may not be required on all hinges. Easily adjustable.
Number of hinges used determines maximum door weight and width. Strong wind conditions, drafts, carpeting drag, twisted/misaligned frames, or weatherstripping on doors may require additional spring hinges.
Hager does not recommend using spring hinges on doors over 7ft.
For maximum versatility use all spring hinges or a combination of spring hinges and ball bearing hinges. Do not use plain bearing hinges.
Three Knuckle
Template Hole Pattern
Material: Steel w/ Steel components
Fasteners: (door leaf) 2 x 1/4-20 w/ grommet nuts, (jamb leaf) 1/2 x 12-24
Thru-bolts and grommets for wood door applications
Specify finish when ordering.
Standard packaging includes one (1) hinge with screws.
Complies with ANSI/BHMA standards for ANSI A156.1
Meets codes for hotels, motels, institutions, and commercial buildings.
For special requests (i.e. Raised Barrel, Hospital Tips, special Screws, etc.) please call for pricing and availability.
The following part numbers are available by selecting the options above.
1253-4.5-US101253-4.5-US10A1253-4.5-US10B1253-4.5-US26D1253-4.5-US31253-4.5-US41253-4.5-USP
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.